Mini Scoop D12 Plan Design using MDF 18mm or Plywood 3/4
Cutting Guide ( Size in CM )
Size in MM
Are you ready to build your own Mini Scoop D12 speaker cabinet? Whether you’re a DIY enthusiast or an audio aficionado, crafting your own speaker cabinet can be a rewarding project. In this guide, we’ll walk through the process of designing and cutting the cabinet using either MDF or plywood, providing complete sizes and a cutting guide to help you along the way.
Understanding the Mini Scoop D12 Design
The Mini Scoop D12 is a compact bass cabinet design known for its efficiency and deep bass response. It’s a popular choice among sound system enthusiasts due to its compact size and powerful performance. Before we dive into the construction process, let’s understand the basic design principles:
- The Mini Scoop D12 is a folded horn bass cabinet, designed to enhance low-frequency sound reproduction.
- It typically houses a 12-inch speaker driver.
- The cabinet is constructed from either Medium Density Fiberboard (MDF) or Plywood, both of which are durable and suitable for speaker cabinet construction.
Materials Needed
Before we get started, gather the following materials:
- MDF or Plywood (18mm thickness for MDF, 3/4 inch for plywood)
- Speaker driver (12 inches)
- Wood glue
- Screws
- Circular saw or table saw
- Drill
- Screwdriver
- Measuring tape
- Pencil
- Safety gear (gloves, goggles, ear protection)
Cutting Guide
Panel Sizes:
- Front Panel: 38.20 x 40.64 cm
- Side Panels (2): 44.65 x 51.80 cm
- Top Panel: 40.64 x 44.65 cm
- Bottom Panel: 40.64 x 44.65 cm
- Port Divider: 29.94 x 8.40 cm
- Port 1 : 27.77 x 44.65 cm
- Port 2: 19.70 x 44.65 cm
- Port 3: 19.70 x 44.65
Cutting Instructions:
- Cut the Panels: Using a circular saw or table saw, cut the panels to the specified sizes. Double-check measurements before cutting to ensure accuracy.
- Assemble the Box:
- Begin by attaching the Front Panel to the Side Panels. Apply wood glue along the edges and use screws to secure them together.
- Next, attach the Top and Bottom Panels in the same manner.
- Insert the Internal Divider into the box, positioning it centrally.
- Secure the Support Braces inside the box to provide additional support for the speaker driver.
- Attach the Bracing Strips diagonally from the top corners to the bottom corners for reinforcement.
- Speaker Mounting: Cut a hole in the Front Panel to mount the speaker driver. Ensure it’s centered and aligned properly.
- Finishing Touches: Sand the edges of the cabinet to remove any roughness. You can also paint or varnish the cabinet to your preference.
Conclusion
Building your Mini Scoop D12 speaker cabinet can be a fulfilling project that enhances your audio setup. By following this cutting guide and using either MDF or plywood, you’ll create a sturdy and effective cabinet to house your speaker driver. Remember to take safety precautions when using power tools, and enjoy the process of crafting your own audio equipment!
